- ページ 3

計測機器 Autool BT60のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Autool BT60 12 ページ。 Battery capacity monitor

● Engine starting performance is displayed in 5 stages with

LED indicators to inform you of battery status.

● The battery is detected to be discharged due to forgetting

to turn off switches such as headlights and notifies you that it

needs to be recharged.

● A failure of the vehicle's charging system is detected and

you are notified that the vehicle needs to be inspected.

Precautions for using the car battery lifespan diagnose

unit

● Since this product needs to diagnose the status of the

battery when starting the car engine, it needs to be installed

and used on the battery with the car.

● This product determines the battery status at the time of

engine starting, as well as determines the battery status at the

time of engine stop. Please always use it together with the

battery.

● This product consumes very little current and has almost

no effect on the car battery even if it is kept always installed in

the car.

Installation

After confirming that the car battery is in normal condition,

please install the product in the following order.

● After connecting the⊕cable connector to the "+"

connector of the battery, insert the⊕side connector (red) of

this product into the bolt of the⊕side cable connector from the

side to firmly fix the nut.

● After connecting the

connector of the battery, insert the

this product into the bolt of the

cable connector to the "-"

side connector (black) of

side cable connector from