- ページ 10

スクーター Afikim Breeze-CのPDF メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Afikim Breeze-C 18 ページ。

7.1 Controller Programming with hand programmer SP1 :

The list of parameters fit to power-units 950W-12km/h,10km/h and 15km/h.

The parameters refer to "S-Drive 120" controller with hand programmer "SP1"

To program through the "Charge Socket" use the adaptor.

Programmer SP1

Instructions to change the parameters :

1. Connect the adaptor to the programmer and connect to the "Charge Socket" –

the programmer will start working.

2. The up / down arrows let you choose the parameters.

3. In order to change a parameter – stand on the parameter press "enter" the

values will then appear in the display window.

4. With the help of the arrows you can change the values.

5. After changing the value push enter the scooter will beep – turn key switch off

and then on.

6. The programmer will display the next parameter. To make further changes

repeat step # 5

7. Press enter again to return to the parameter menu

8. When you get to the "Engineer Menu" press enter to get to the sub-menu

How to improve and to adjust parameters to the customer :

1. Change the acceleration of the scooter, forward --- Line 1.

2. Change the deceleration of the scooter, forward --- Line 2.

3. Change the acceleration of the scooter, reverse --- Line 3.

4. Change the deceleration of the scooter, reverse --- Line 4.

5. Change the max. speed – forward --- Line 5.

6. Change the max. speed – reverse .--- Line 7.

7. Change the direction of travel of the Wig-Wag. Invert Throttle --- Line 9 .

8. The time until entering into sleep mode when the key switch is "On" .

Sleep Timer --- Line 10.

9. Reads the Code number of faults and how many times they occurred.

Read System Log. Read System Log --- Line 11 .

10. Working time of the scooter. Read timer --- Line 12.

7.2 Controller Parameters List (for manual and PC

programmer)

See external separated file.

Adaptor to the Charger Socket