ページを印刷する
2. MANUAL ARMING & DISARMING
If you choose the MANUAL (Active) arming mode, follow the steps below.
1. Switch OFF the ignition, exit vehicle, and be sure all protected openings are
closed.
2. Press the ON/OFF button on the remote transmitter.
3. The vehicle horn, or siren will chirp one (1) time, the parking lights will flash
one (1) time, the doors will lock, and the LED will begin flashing. Approximately
five (5) seconds later the RF-303 will be fully armed.
4. To DISARM the RF-303, approach the vehicle and press the ON/OFF
button on the remote transmitter. The vehicle horn, or siren will chirp two (2)
times, the parking lights will flash two (2) times, the doors will unlock, and the
LED will turn off. Enter the vehicle.
F. AUTOMATIC REARMING
The RF-303 is equipped with an automatic rearming circuit that will return the
alarm to a fully armed state if a door is not opened within 60 seconds after
disarming. If desired, this automatic rearming circuit can be eliminated at the time
of installation
G. BREACH WARNING
The RF-303 is equipped with a BREACH WARNING to tell you, upon
disarming, if the alarm has been triggered in your absence. If an alarm breach
has occurred, the LED STATUS INDICATOR will be flashing in a 2 second
7