Autopage RF-303 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автосигналізація Autopage RF-303. Autopage RF-303 18 сторінок.

2. MANUAL ARMING & DISARMING

If you choose the MANUAL (Active) arming mode, follow the steps below.

1. Switch OFF the ignition, exit vehicle, and be sure all protected openings are

closed.

2. Press the ON/OFF button on the remote transmitter.

3. The vehicle horn, or siren will chirp one (1) time, the parking lights will flash

one (1) time, the doors will lock, and the LED will begin flashing. Approximately

five (5) seconds later the RF-303 will be fully armed.

4. To DISARM the RF-303, approach the vehicle and press the ON/OFF

button on the remote transmitter. The vehicle horn, or siren will chirp two (2)

times, the parking lights will flash two (2) times, the doors will unlock, and the

LED will turn off. Enter the vehicle.

F. AUTOMATIC REARMING

The RF-303 is equipped with an automatic rearming circuit that will return the

alarm to a fully armed state if a door is not opened within 60 seconds after

disarming. If desired, this automatic rearming circuit can be eliminated at the time

of installation

G. BREACH WARNING

The RF-303 is equipped with a BREACH WARNING to tell you, upon

disarming, if the alarm has been triggered in your absence. If an alarm breach

has occurred, the LED STATUS INDICATOR will be flashing in a 2 second