Autopage RF-303 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автосигналізація Autopage RF-303. Autopage RF-303 18 сторінок.

D. VALET/OVERRIDE SWITCH

NOTE: Both the VALET and OVERRIDE functions are performed from the

same switch.

1. OVERRIDE FUNCTION

he OVERRIDE FUNCTION may be used if the RF-303 remote is lost or

inoperative. To operate the OVERRIDE FUNCTION, enter the vehicle (alarm

will sound). Switch the ignition to ON. Move the VALET/OVERRIDE switch

to ON, then OFF. The alarm will stop. The RF-303 will be disarmed. Quickly

replace or service the remote transmitter to insure continued vehicle protection.

2. VALET FUNCTION

If PASSIVE (Automatic) arming has been is selected, the RF-303 may be

placed into the VALET (stand-by) mode to allow for vehicle service, washing,

or attendant parking without self-arming after the ignition has been switched off,

and without leaving the RF-303 remote control with unauthorized individuals.

To operate the VALET FUNCTION, turn the vehicle ignition to ON and move

the VALET/OVERRIDE switch to ON.

To return to normal operation, turn the vehicle ignition to ON and move the

VALET/OVERRIDE switch to OFF.

3. KEYLESS ENTRY MODE

In the valet mode, the vehicle doors can be locked and unlocked using the

remote if the remote door lock/unlock system is installed. (*) However, there

will be no chirp confirmation. It is strongly recommended that the driver visually

confirm that the doors are locked or unlocked.