- ページ 11

カーアラーム Autopage RF-503のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Autopage RF-503 16 ページ。 Remote transmitters
Autopage RF-503 にも：マニュアル (2 ページ)

one of the transmitters from vehicle #2. The vehicle horn or siren will respond with a confirming chirp.

Both transmitters are now programmed to vehicle #1.

VEHICLE #2

Enter the programming mode on vehicle #2 and push Button II on the first transmitter used for vehicle

#1. The vehicle horn or siren will respond with a confirming chirp. Within five (5) seconds, push Button

I on the second transmitter that had been previously programmed on vehicle #1. The vehicle horn or

siren will respond with a confirming chirp. Both transmitters are now programmed to vehicle #2.

NOTE: In the boxes below, the first transmitter is assumed to be the primary transmitter of vehicle #1,

and the second transmitter is assumed to be the primary transmitter of vehicle #2.

VEHICLE #1

TRANSMITTER #1

ON/OFF Button

TRANSMITTER #2

AUX Button

NOTE: In both cases the primary transmitter assigned to each vehicle will control all alarm functions

described within this manual.

Example: If Button I on one of the transmitters from vehicle #1 has been programmed to vehicle #1,

then all alarm functions will operate on vehicle #1. If Button II from this transmitter has been

programmed to the second vehicle, then ONLY arm/disarm commands are possible.

2. TWO VEHICLE OPERATION WITH TRUNK RELEASE FEATURE INSTALLED

See your AutoPage dealer for details.

AUTOPAGE ALARM ACCESSORIES

AP4000EX

Vehicle security paging was originated by AutoPage over 18 years ago. The AP4000EX is our latest

version providing a full four watts of output, and a unique digital format. One AP4000EX pager is

capable of monitoring up to three vehicles. (*) The pager will notify you with a choice of audible, visual,

or vibration alerts. Its memory will also store the last trigger.

(*) Second and third vehicles must be equipped with an optional AP4000EX transmitter.

VEHICLE #2

AUX Button

ON/OFF Button