Autopage RF-503 사용 설명서 - 페이지 11

{카테고리_이름} Autopage RF-503에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autopage RF-503 16 페이지. Remote transmitters
Autopage RF-503에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

one of the transmitters from vehicle #2. The vehicle horn or siren will respond with a confirming chirp.
Both transmitters are now programmed to vehicle #1.
VEHICLE #2
Enter the programming mode on vehicle #2 and push Button II on the first transmitter used for vehicle
#1. The vehicle horn or siren will respond with a confirming chirp. Within five (5) seconds, push Button
I on the second transmitter that had been previously programmed on vehicle #1. The vehicle horn or
siren will respond with a confirming chirp. Both transmitters are now programmed to vehicle #2.
NOTE: In the boxes below, the first transmitter is assumed to be the primary transmitter of vehicle #1,
and the second transmitter is assumed to be the primary transmitter of vehicle #2.
VEHICLE #1
TRANSMITTER #1
ON/OFF Button
TRANSMITTER #2
AUX Button
NOTE: In both cases the primary transmitter assigned to each vehicle will control all alarm functions
described within this manual.
Example: If Button I on one of the transmitters from vehicle #1 has been programmed to vehicle #1,
then all alarm functions will operate on vehicle #1. If Button II from this transmitter has been
programmed to the second vehicle, then ONLY arm/disarm commands are possible.
2. TWO VEHICLE OPERATION WITH TRUNK RELEASE FEATURE INSTALLED
See your AutoPage dealer for details.
AUTOPAGE ALARM ACCESSORIES
AP4000EX
Vehicle security paging was originated by AutoPage over 18 years ago. The AP4000EX is our latest
version providing a full four watts of output, and a unique digital format. One AP4000EX pager is
capable of monitoring up to three vehicles. (*) The pager will notify you with a choice of audible, visual,
or vibration alerts. Its memory will also store the last trigger.
(*) Second and third vehicles must be equipped with an optional AP4000EX transmitter.
VEHICLE #2
AUX Button
ON/OFF Button
11