- ページ 2

室内装飾品 9to5 seating ance 306のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。9to5 seating ance 306 2 ページ。

STEP 2

Attach the arms to the seat.

2A. Invert the seat, fabric side down, and remove

the ¼" bolts for the arms from the seat with the

Allen wrench. There are 8 bolts total (4 per arm).

2B. Adjust the left and right arms to be symmetrical,

then reattach the bolts to secure the arms.

STEP 4

Attach the back to the seat.

2B.

Place the back plate under

the seat as shown, aligning the holes. Using the

Allen wrench, reattach the bolts from the top.

4A.

Using the Allen wrench,

remove the 3 M8 bolts from

the back.

STEP 3

Attach the mechanism to the seat.

3A. Remove the ¼" bolts and that hold the mechanism.

There are 4 bolts total.

3B. Place the mechanism on the underside of the

seat as shown, then reattach the bolts.

STEP 5

Join the back and seat with the cylinder and base.

Insert the assembled back/seat unit onto the

cylinder, which was placed in the base in Step 1.

Press down ﬁrmly to secure.

PHONE 888.925.SEAT

FAX 866.925.SEAT

3211 Jack Northrop Ave. Hawthorne, CA 90250

9to5seating.com

Updated 2/16/2021