9to5 seating ance 306 조립 지침 - 페이지 2

{카테고리_이름} 9to5 seating ance 306에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 9to5 seating ance 306 2 페이지.

STEP 2

Attach the arms to the seat.

2A. Invert the seat, fabric side down, and remove

the ¼" bolts for the arms from the seat with the

Allen wrench. There are 8 bolts total (4 per arm).

2B. Adjust the left and right arms to be symmetrical,

then reattach the bolts to secure the arms.

STEP 4

Attach the back to the seat.

2B.

Place the back plate under

the seat as shown, aligning the holes. Using the

Allen wrench, reattach the bolts from the top.

4A.

Using the Allen wrench,

remove the 3 M8 bolts from

the back.

STEP 3

Attach the mechanism to the seat.

3A. Remove the ¼" bolts and that hold the mechanism.

There are 4 bolts total.

3B. Place the mechanism on the underside of the

seat as shown, then reattach the bolts.

STEP 5

Join the back and seat with the cylinder and base.

Insert the assembled back/seat unit onto the

cylinder, which was placed in the base in Step 1.

Press down ﬁrmly to secure.

PHONE 888.925.SEAT

FAX 866.925.SEAT

3211 Jack Northrop Ave. Hawthorne, CA 90250

9to5seating.com

Updated 2/16/2021