- ページ 9

農機具 Galebreaker BayscreenのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Galebreaker Bayscreen 16 ページ。

Bayscreen

ATTENTION: Under no circumstances allow the Galebreaker

mesh material to run into the ratchet. Further trimming may be

necessary.

Hold the ratchet assembly in position on opposite H-Beam. Thread the top strap

through the ratchet, do not fully tension screen at this stage, Figure 5(iii). Repeat

stage on all remaining ratchets/straps. Push all the ratchets and hooks away from

each other to provide good tension to the vertical edges of the Bayscreen (Figure

7).

Tighten all ratchets as firmly as possible, applying the tension equally to avoid

wrinkles appearing in the material. Tension can be applied as firmly as possible

by hand to the point where operation of the ratchet is no longer possible, but

Figure 7, Tensioning the Screen

-9-

Installation

ENG