Galebreaker Bayscreen 설치 및 운영 지침 매뉴얼 - 페이지 9

{카테고리_이름} Galebreaker Bayscreen에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galebreaker Bayscreen 16 페이지.

Bayscreen

ATTENTION: Under no circumstances allow the Galebreaker

mesh material to run into the ratchet. Further trimming may be

necessary.

Hold the ratchet assembly in position on opposite H-Beam. Thread the top strap

through the ratchet, do not fully tension screen at this stage, Figure 5(iii). Repeat

stage on all remaining ratchets/straps. Push all the ratchets and hooks away from

each other to provide good tension to the vertical edges of the Bayscreen (Figure

7).

Tighten all ratchets as firmly as possible, applying the tension equally to avoid

wrinkles appearing in the material. Tension can be applied as firmly as possible

by hand to the point where operation of the ratchet is no longer possible, but

Figure 7, Tensioning the Screen

-9-

Installation

ENG