ページを印刷する
-The user will have to remove the robot from the window as soon as possible.
-User can retrieve the product by pulling the safety rope lightly in a corner near the window to prevent it
from falling.
Please make sure the battery is fully charged (green light) before using
-Turn off the robot switch and connect it to the network. Orange light indicates it is charged.
-The green light indicates that the product is fully charged.
How to clean the table
-Put the robot on the table and select the automatic cleaning mode, the robot will enter the table cleaning
mode.
notice
-Do not use the robot on windows without frames for safety.
-Make sure the cleaning ring is positioned correctly on the cleaning wheel to avoid possible leaks.
-Do not use in rainy and humid days for safety
-Establish a safety or warning area under windows or doors without balconies.
LED SIGNALS
The robot vacuum cleaner has 3 indicator lights, each with a distinct function:
it starts to perform a cleaning function. When the robot is cleaning the light will be blue and blink.
-Light 3 located on the right indicates when the robot is in Pause / Stop mode. This light comes on when the
robot is fixed to the window without doing any cleaning mode, when the robot is in stop / pause or when
the cleaning robot finishes. The light it shines is red and flashing '
EXAMPLES:
1.Robot with incomplete load (Red 1 set)
2.Robot fully loaded (solid Blue 1)
3.Robot with incomplete load Pause / stop mode (Red 1 solid and three flashing)
-Light 1 is on the left, it indicates the battery status. When the robot is
incomplete or the battery is charging, Light 1 will be solid red. When the
robot is fully charged, the light will be solid blue.
-Light 2 is located in the center indicates when the robot starts cleaning.
This light comes on when the robot is already fixed in the window and as