DynaSun Home W110 Manuel - Sayfa 4

Elektrikli Süpürge DynaSun Home W110 için çevrimiçi göz atın veya pdf Manuel indirin. DynaSun Home W110 10 sayfaları.

-The user will have to remove the robot from the window as soon as possible.

-User can retrieve the product by pulling the safety rope lightly in a corner near the window to prevent it

from falling.

Please make sure the battery is fully charged (green light) before using

-Turn off the robot switch and connect it to the network. Orange light indicates it is charged.

-The green light indicates that the product is fully charged.

How to clean the table

-Put the robot on the table and select the automatic cleaning mode, the robot will enter the table cleaning

mode.

notice

-Do not use the robot on windows without frames for safety.

-Make sure the cleaning ring is positioned correctly on the cleaning wheel to avoid possible leaks.

-Do not use in rainy and humid days for safety

-Establish a safety or warning area under windows or doors without balconies.

LED SIGNALS

The robot vacuum cleaner has 3 indicator lights, each with a distinct function:

it starts to perform a cleaning function. When the robot is cleaning the light will be blue and blink.

-Light 3 located on the right indicates when the robot is in Pause / Stop mode. This light comes on when the

robot is fixed to the window without doing any cleaning mode, when the robot is in stop / pause or when

the cleaning robot finishes. The light it shines is red and flashing '

EXAMPLES:

1.Robot with incomplete load (Red 1 set)

2.Robot fully loaded (solid Blue 1)

3.Robot with incomplete load Pause / stop mode (Red 1 solid and three flashing)

-Light 1 is on the left, it indicates the battery status. When the robot is

incomplete or the battery is charging, Light 1 will be solid red. When the

robot is fully charged, the light will be solid blue.

-Light 2 is located in the center indicates when the robot starts cleaning.

This light comes on when the robot is already fixed in the window and as