ページを印刷するGeneral Functions Overview
1. TRIG:
Trigger input
A stream of trigger signals will emit from OUT when a trigger or gate signal is received
at the TRIG input
Threshold: 2.5V
2. PULSES CV:
Control voltage input for PULSES
Control voltage is added to the knob position
Range: 0V – 5V
3. PULSES:
Controls the number of pulses that output when a trigger or gate signal is received by
the TRIG input
If the knob is far left, the number of pulses will be set to 1
If the knob is far right, the number of pulses will be set to 32
4. RATE CV:
Control voltage input for RATE
Control voltage is added to the knob position
Range: 0V – 5V
5. RATE:
Controls the delay time in between successive pulses
If the knob is far left, the delay time in between successive pulses will be set to 10ms
If the knob is far right, the delay time in between successive pulses will be set to
500ms
6