2hp Brst Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Інвертор 2hp Brst. 2hp Brst 7 сторінок.

General Functions Overview

1. TRIG:

Trigger input

A stream of trigger signals will emit from OUT when a trigger or gate signal is received

at the TRIG input

Threshold: 2.5V

2. PULSES CV:

Control voltage input for PULSES

Control voltage is added to the knob position

Range: 0V – 5V

3. PULSES:

Controls the number of pulses that output when a trigger or gate signal is received by

the TRIG input

If the knob is far left, the number of pulses will be set to 1

If the knob is far right, the number of pulses will be set to 32

4. RATE CV:

Control voltage input for RATE

Control voltage is added to the knob position

Range: 0V – 5V

5. RATE:

Controls the delay time in between successive pulses

If the knob is far left, the delay time in between successive pulses will be set to 10ms

If the knob is far right, the delay time in between successive pulses will be set to

500ms