2hp Brst Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Інвертор 2hp Brst. 2hp Brst 7 сторінок.

Installation

To install, locate 2 HP of space in your Eurorack case and confirm the positive 12 volts

and negative 12 volts sides of the power distribution lines. Plug the connector into the

power distribution board of your case, keeping in mind that the red band corresponds

to negative 12 volts. In most systems, the negative 12 volt supply line is at the bottom.

The power cable should be connected to the Brst with the red band facing the front of

the module.

Specifications

Format: 2 HP Eurorack module

Depth: 47mm (Skiff Friendly)

Max Current: +12V = 26mA

-12V = 7mA