- ページ 14

食器洗い機 DCS DishDrawer DD24DUT7のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。DCS DishDrawer DD24DUT7 18 ページ。 Dishdrawer series
DCS DishDrawer DD24DUT7 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

SECURE TO THE CABINETRY ON THE SIDES

10b

For further adjustment,

using the most appropriate

length Hexagonal socket

supplied, fully extend

leveling feet up to required

distance by hand.

Hexagonal

socket

REFIT THE DRAWER ONTO THE RUNNERS

12b

Ensure the drawer

is now rotated

clockwise back.

Ensure the release tabs on

both sides are reset fully.

To access the side brackets,

you might have to push aside

the insulation. After securing,

ensure the sound insulation is

repositioned correctly.

Secure using two pairs

of formed brackets

(use 5⁄8" (16 mm)

screws). Repeat on

the other side of the

chassis.

Ensure product is level and

aligning with cabinetry.

Before refitting the drawer,

ensure the hoses are not

twisted and the latches at

the rear of each drawer

runner are facing forward.

OPTIONALLY SECURE TO THE CABINETRY ABOVE

11b

The top mounting

brackets will only bend

(x2)

upwards a maximum of

3⁄8"(10 mm).