DCS DishDrawer DD24DUT7 Instrukcja instalacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka DCS DishDrawer DD24DUT7. DCS DishDrawer DD24DUT7 18 stron. Dishdrawer series
Również dla DCS DishDrawer DD24DUT7: Skrócona instrukcja obsługi (2 strony)
SECURE TO THE CABINETRY ON THE SIDES
10b
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
Hexagonal
socket
x4
REFIT THE DRAWER ONTO THE RUNNERS
12b
Ensure the drawer
is now rotated
clockwise back.
4
16
5
19
1
13
Ensure the release tabs on
both sides are reset fully.
To access the side brackets,
you might have to push aside
the insulation. After securing,
ensure the sound insulation is
repositioned correctly.
Secure using two pairs
of formed brackets
(use 5⁄8" (16 mm)
screws). Repeat on
the other side of the
chassis.
Ensure product is level and
aligning with cabinetry.
3
15
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
2
14
OPTIONALLY SECURE TO THE CABINETRY ABOVE
11b
14
The top mounting
brackets will only bend
(x2)
upwards a maximum of
3⁄8"(10 mm).