- ページ 6

コントローラー 2iB SC10のPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。2iB SC10 16 ページ。 Single pump controller
2iB SC10 にも：クイック・スタート・マニュアル (5 ページ)

5.7

Current Window Setting

See section 4.1 Snoring Detection Explained for an explanation of the

Current Window.

The current window setting has 4 dip switches +2%, +4%, +8% and +16%,

by selecting a current window it adds the percentage to the stop current

setpoint.

As an example if the stop current threshold is set to 20% of CT range and

the window current is set to +4% via dip switch 13 the stop current

threshold = 20% + 4% = 24 % of CT range.

Single Phase Motors. See also the note about single-phase motors in

section 4.1 Snoring Detection Explained.

5.8

Current Setpoint Adjustment

An additional adjustment method is by using the up () and down () buttons independently. By

pushing the up or down button it will adjust the stop current threshold to the user's desired value as

a percentage of CT current.

Note: This settings is non-volatile. It is stored through power-cycles of the SC10.

Display and LED Indication

6.1

Current % Display

PA = PAUSING. Pump is Pausing.

CL = CLEANING. Pumps is Stopped for a Cleaning flush.

Number = the measured current as a percentage of the measured range. (Taking into account the Current Transformer range

configured using the DIP switches as per section 5.1.)

6.2

LED Indicators

See section 12 Reference for details of the LED indicators.

Current Window (%)

Setting

On: +16%

On: +8%

On: +4%

On: +2% (default)