- ページ 12

産業機器 Emerson FB2200のPDF フィールド交換マニュアルをオンラインで閲覧またはダウンロードできます。Emerson FB2200 16 ページ。 Flow computer i/o terminal board
Emerson FB2200 にも：フィールド交換マニュアル (8 ページ), フィールド交換マニュアル (14 ページ), フィールド交換マニュアル (8 ページ), フィールド交換マニュアル (16 ページ), フィールド交換マニュアル (16 ページ)

Pull the solar controller cable and battery cable out of the BATT terminals on terminal block

TB2.

Attach the replacement cable(s) to the BATT terminals on terminal block TB2. Follow the

wiring guidelines in the flow computer instruction manual and wire the connections as

shown in the wiring graphic on page 6 (for solar cabling) or page 9 (for battery cabling).

Close the battery compartment and junction box, then close the flow computer enclosure.

Removing/Replacing the Fuse(s)

Flow Computer Fuse Field Installed Accessory Kit Part No. 395829-01-0 for Use with UL Listed Class

I, Division 2, Groups A, B, C, and D Model Series FB2100 and FB2200.

Reference the wiring graphic on page 9 for the fuse.

Open the flow computer enclosure.

Gently pull the cable containing the fuse out so you have access to the fuse holder.

Grasp the widest part of the fuse holder with your thumb and index finger.

FB2100/FB2200 Flow Computer 30W Solar Panel Field Replacement Guide

D301824X012

November 2020