Emerson FB2200 현장 교체 매뉴얼 - 페이지 12
{카테고리_이름} Emerson FB2200에 대한 현장 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Emerson FB2200 16 페이지. Flow computer i/o terminal board
Emerson FB2200에 대해서도 마찬가지입니다: 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (14 페이지), 현장 교체 매뉴얼 (8 페이지), 현장 교체 매뉴얼 (16 페이지), 현장 교체 매뉴얼 (16 페이지)
페이지 인쇄
5.
Pull the solar controller cable and battery cable out of the BATT terminals on terminal block
TB2.
6.
Attach the replacement cable(s) to the BATT terminals on terminal block TB2. Follow the
wiring guidelines in the flow computer instruction manual and wire the connections as
shown in the wiring graphic on page 6 (for solar cabling) or page 9 (for battery cabling).
7.
Close the battery compartment and junction box, then close the flow computer enclosure.
Removing/Replacing the Fuse(s)
Flow Computer Fuse Field Installed Accessory Kit Part No. 395829-01-0 for Use with UL Listed Class
I, Division 2, Groups A, B, C, and D Model Series FB2100 and FB2200.
Reference the wiring graphic on page 9 for the fuse.
1.
Open the flow computer enclosure.
2.
Gently pull the cable containing the fuse out so you have access to the fuse holder.
3.
Grasp the widest part of the fuse holder with your thumb and index finger.
FB2100/FB2200 Flow Computer 30W Solar Panel Field Replacement Guide
D301824X012
November 2020
9