- ページ 4

アンプ Gallien-Krueger 700RB-IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gallien-Krueger 700RB-II 8 ページ。 Artist series
Gallien-Krueger 700RB-II にも：オーナーズマニュアル (16 ページ)

ページを印刷する

Safety Information

Please read all enclosed safety precautions before

connecting or operating this product.

Your amplifier has been factory configured for use

with the specific line voltage for your location only.

For example, units set to operate within countries

that supply 100-120 volt electrical service are not

compatible with 230-240 volt systems used in other

countries.

120 Volt/60Hz 15 amp circuit for the USA and

Canada.

230 Volt/(50/60Hz) 10 amp circuit for the UK and

Australia.

230 Volt/(50/60Hz) 10 amp circuit for Europe.

100 Volt/50Hz 15 amp circuit for Japan.

220 Volt/50Hz 10 amp circuit for Korea.

Proper AC circuit for all other countries.

Verify AC Circuit Capacity Before Use: The high

power output of your amplifier may require heavy

current draw under full load conditions. Connecting the

amplifier to a line with specifications other than

indicated above can create a safety or fire hazard and

may damage the amplifier. Connecting to the same

circuit used by other heavy-power devices, such as

high wattage lights, may cause circuit breakers to trip. It

is always a good idea to avoid using any audio equipment

on the same AC circuit as equipment with motors, such

as air conditioners or refrigerators. This will lessen the

possibility of power variation and electrical start-up noise

affecting your sound.

AC Power Cord: To avoid safety hazards, use only the

power cord supplied with your unit. If a replacement cord

is needed, make certain to use a standard IEC

compliant cord. Damaged power cords should be

replaced immediately. When setting up, make that the AC

plug is easily accessible. If you do not intend to use the

amplifier for a considerable length of time, disconnect

the plug from the AC Mains Socket.

700RB-II & 1001RB-II

Earth Grounding Connection: To prevent electric

shock, do not remove the grounding plug on the power

cord, or use any plug or extension cord that does not

have a grounding plug provided. Make certain that the

AC outlet is properly grounded as well. Do not use an

adapter plug with this product.

Do Not Open the Amplifier Enclosure: There are

no user serviceable parts inside this product. Opening the

amplifier enclosure may present a shock hazard.

Modification to the product will void your warranty. If

liquid enters the unit, or any metal object such as a

paper clip accidentally falls inside the enclosure,

disconnect the unit from the AC power source

immediately and consult an authorized service station.

Setup: To insure proper operation and to avoid

potential safety hazards, place the unit on a firm, level

surface. Do not plug or unplug the instrument or

speaker cable while the amplifier power is on.

Heat & Ventilation: For proper ventilation, maintain a

clearance of at least 8" above, sides, front and rear of the

unit for combos and 1.75" (one rack space) of

clearance above the unit for heads. Avoid using in

extremely hot or cold locations and areas that are

exposed to direct sunlight or near heating equipment.

Avoid using in moist or high humidity areas.

Cleaning & Maintenance: Clean only with a dry cloth.

Never use benzene, thinner, alcohol, or other volatile

cleaning agents. Do not use abrasive cleaners, as they

may damage the finish of metal parts. Avoid spraying

insecticides near the unit. No other maintenance

should be necessary.

Traveling: If traveling with the unit frequently, we

recommend a road case or cover to protect it from

scratches and road wear.

Packaging: The carton and packing materials used in

shipping your new amplifier were specifically designed to

cushion it from the shocks and vibration that occur

during transport. We suggest that you save the carton and

packing materials for use in shipping, in the event you

move, or the amplifier needs repair.