- ページ 16

アンプ Galls Street Thunder ST280のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Galls Street Thunder ST280 20 ページ。 Siren amplifier & light controller
Galls Street Thunder ST280 にも：据付・取扱説明書 (18 ページ)

ページを印刷する

Fuses

There are several fuses in this unit that protect it from shorts, spikes, and other such

electrical problems that may possibly damage the unit.

The HRT is protected internally by a 2 amp self-resetting fuse. This is not user

serviceable, but will automatically reset once the short is removed.

The entire unit is protected by a 20 amp

automotive type fuse, located on the

back of the unit. If your unit completely

stops working, this fuse should be

checked.

Seven additional fuses are

located inside the control

box. These fuses protect

the seven high-current

light outputs. If only one

of your outputs is not

working correctly, it may

be that the corresponding

fuse for that output has

blown.

Cover Removal - Remove the four Philip head screws located on the back of the

unit. DO NOT REMOVE THE SCREWS ON THE FRONT OF THE UNIT!

Slide the top cover off the front face of the unit. Take care not to

damage the microphone cord during this procedure. This cover

can be removed completely from the siren unit. Carefully slide

the cover over the microphone and set it aside.

After the cover has been removed, find the location of the fuses (see the diagram

below). Each high current light output is protected with a separate 20A

automotive blade fuse. Check each of these fuses to make sure they are all

working properly, and none have blown.

Service

-14-