- ページ 9

ネットワークカード HighTek Harness Group HTKWLAN02のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HighTek Harness Group HTKWLAN02 17 ページ。 11mbps minipci wlan card

traffic, so there is no need to specify a channel.

SSID: Officially, in wireless networks the network name is known as the SSID (Service Set

ID entifier), and is used by Access Points and stations to identify a wireless LAN. Your

HTK WLAN Interface adapter scans the available channels looking for an Access Point

or another station which has specified this same SSID. It then attempts to associate with

these Access Points or stations to form a wireless LAN. To change the SSID, simply

highlight it, type the new SSID, and click the Apply button. In typical infrastructure

applications a company will use a single SSID for all Access Points. If the radio is

scanning and cannot find a channel when an Access Point is known to be in range, verify

that the Network Name is set correctly.

Channel: shows the channel on which the connection is made. In Infrastructure mode, this

number changes as the radio scans the available channels.

Desired Rate: shows the current transmit rate of the current association

Profile: HTK WLAN Wireless LAN Configuration Utility provides the easy to use profile

function. Profile memorize the Network settings include Network Type, SSID, Desired

Rate and

can recall the settings by

then choose the proper profile list.

Status: shows the association state of your computer with the wireless LAN. When

operating in Infrastructure mode, this field shows the MAC address of the Access Point

with which you are communicating. When operating in Peer-to Peer mode, this field

shows the virtual MAC address used by computers participating in the AdHoc

Signal Strength: is based on the received signal strength measurement of the baseband

processor of the Beacon signal.

Link Quality: is based on the quality of the received signal of Access Point beacon.

Network Address: shows the current Network status such as MAC address (Wireless Card),

DHCP (Enable or not), IP address, Subnet Mask address, Gateway Address and DNS

server address.

Statistics :

This option enables you to view the available statistic information (Total Packet Number, Error Packet

Encryption Key. User can enter profile name of current setting

clicking the scroll button

"Right- Clicking"

(Up to 10

sets). Users

the icon in system tray