HighTek Harness Group HTKWLAN02 Kullanıcı Kılavuzu - Sayfa 9
Ağ Kartı HighTek Harness Group HTKWLAN02 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HighTek Harness Group HTKWLAN02 17 sayfaları. 11mbps minipci wlan card
traffic, so there is no need to specify a channel.
SSID: Officially, in wireless networks the network name is known as the SSID (Service Set
ID entifier), and is used by Access Points and stations to identify a wireless LAN. Your
HTK WLAN Interface adapter scans the available channels looking for an Access Point
or another station which has specified this same SSID. It then attempts to associate with
these Access Points or stations to form a wireless LAN. To change the SSID, simply
highlight it, type the new SSID, and click the Apply button. In typical infrastructure
applications a company will use a single SSID for all Access Points. If the radio is
scanning and cannot find a channel when an Access Point is known to be in range, verify
that the Network Name is set correctly.
Channel: shows the channel on which the connection is made. In Infrastructure mode, this
number changes as the radio scans the available channels.
Desired Rate: shows the current transmit rate of the current association
Profile: HTK WLAN Wireless LAN Configuration Utility provides the easy to use profile
function. Profile memorize the Network settings include Network Type, SSID, Desired
Rate and
can recall the settings by
then choose the proper profile list.
Status: shows the association state of your computer with the wireless LAN. When
operating in Infrastructure mode, this field shows the MAC address of the Access Point
with which you are communicating. When operating in Peer-to Peer mode, this field
shows the virtual MAC address used by computers participating in the AdHoc
Signal Strength: is based on the received signal strength measurement of the baseband
processor of the Beacon signal.
Link Quality: is based on the quality of the received signal of Access Point beacon.
Network Address: shows the current Network status such as MAC address (Wireless Card),
DHCP (Enable or not), IP address, Subnet Mask address, Gateway Address and DNS
server address.
Statistics :
This option enables you to view the available statistic information (Total Packet Number, Error Packet
Encryption Key. User can enter profile name of current setting
clicking the scroll button
or
"Right- Clicking"
9
(Up to 10
sets). Users
the icon in system tray