HighTek Harness Group HTKWLAN02 Kullanıcı Kılavuzu - Sayfa 8

Ağ Kartı HighTek Harness Group HTKWLAN02 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HighTek Harness Group HTKWLAN02 17 sayfaları. 11mbps minipci wlan card

Sayfayı Yazdır

The fields in this menu provide the following information:

Network Type : The HTK WLAN Interface adapter can operate in one of two types of

networks, which are specified in the Network Type: field of the Configuration menu.

Clicking the down arrow at the right of this field displays the available types.

1. AdHoc: IEEE 802.11, the standard on which the WLAN protocol is based, defines two

modes to handle two separate needs. The first, called AdHoc (or IBSS) mode, is used

when two or more wirelessly-enabled PCs wish to exchange data directly, without an

Access Point. In this case the PCs can establish a peer-to-peer network in which they are

the only members and over which they can exchange data. To exchange data, each

computer participating in the AdHoc network must also specify the same

2. Infrastructure: The second mode defined by the IEEE 802.11 standard is called

infrastructure mode, and is the primary application for WLAN operation. In this mode

all data on the wireless network is directed to an Access Point, which then routes the

data to the appropriate wireless station. The Access Point may also be configured to

allow data to be bridged from the wireless network to wired networks. To participate in a

wireless LAN in infrastructure mode, every station and Access Point must specify the

same Network Name. In infrastructure mode, all available channels are scanned for