ページを印刷する3. The retainer nut and eye are replaced and re-tightened.
bottom
and rotated clockwise
rod is rotated to the extreme counter-clockwise
4. There are five, half-revolution
ment, 2 to 3 half turns clockwise
engaged in the adjustment
5. The shock rod must then be pulled out without
nism.
6. The shock can then be re-assembled in reverse order. Be sure to re-install
to do so can seriously damage the shock under use. Pay special attention
are adjusted equally. This will result in maximum
10, WHEELS
The wheels must be centered carefully
very often. The wheel bearings are checked for play and being sealed from outside elements. The brake
drum should be cleaned of rust with emery cloth.
11, CHAIN
It is important
to use only good quality chain
it regularly by washing it in solvent and then lubricating
20. Chain Adjustment
until it engages and drops into the shock adjustment
position,
adjustments
possible for dampening.
is ample. This is achieved by rotating
slots.
rotating
performance
and exactly. All spokes must be free of damage and adjusted equally
5i8"
x 1/4" - Regina - CZ - Diamond, etc., and to service
The shock rod is pushed all the way to the
the shock is on the lightest setting.
We suggest for the first adjust-
the shock rod clockwise while
it, to release it from the adjustment
the rubber bumper.
that the right and left shock
of the Koni shocks.
it.
21. Master link
slots. When the
mecha-
Failing