Maico MC 250 지침서 - 페이지 15

{카테고리_이름} Maico MC 250에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maico MC 250 19 페이지.

3. The retainer nut and eye are replaced and re-tightened.

bottom

and rotated clockwise

rod is rotated to the extreme counter-clockwise

4. There are five, half-revolution

ment, 2 to 3 half turns clockwise

engaged in the adjustment

5. The shock rod must then be pulled out without

nism.

6. The shock can then be re-assembled in reverse order. Be sure to re-install

to do so can seriously damage the shock under use. Pay special attention

are adjusted equally. This will result in maximum

10, WHEELS

The wheels must be centered carefully

very often. The wheel bearings are checked for play and being sealed from outside elements. The brake

drum should be cleaned of rust with emery cloth.

11, CHAIN

It is important

to use only good quality chain

it regularly by washing it in solvent and then lubricating

20. Chain Adjustment

until it engages and drops into the shock adjustment

position,

adjustments

possible for dampening.

is ample. This is achieved by rotating

slots.

rotating

performance

and exactly. All spokes must be free of damage and adjusted equally

5i8"

x 1/4" - Regina - CZ - Diamond, etc., and to service

The shock rod is pushed all the way to the

the shock is on the lightest setting.

We suggest for the first adjust-

the shock rod clockwise while

it, to release it from the adjustment

the rubber bumper.

that the right and left shock

of the Koni shocks.

it.

slots. When the

mecha-

Failing