- ページ 9

コントローラー AGS Merlin 1000SiのPDF インストレーション＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。AGS Merlin 1000Si 16 ページ。 Gas safety products, gas utility controller
AGS Merlin 1000Si にも：ユーザー・インストール・マニュアル (7 ページ), ユーザー・インストール・マニュアル (9 ページ), ユーザーマニュアル (12 ページ)

Installation & Operation Manual

OPERATION

On connecting mains power, an LED on the front of the panel (AGS Logo) will illuminate red.

Turn the key switch to on position.

Turn the key switch to the off position to turn the panel off.

The emergency shut off button is located on the front of the panel.

There is also a facility for remote shut off buttons to be wired in series on the circuit board.

The emergency shut off button(s) will cut off the gas supply and electrics only when activated.

To reinstate the system, the emergency shut off button(s) will need to be reset and the panel

restarted.



Gas On

When the key switch is turned on, the Merlin 1000Si will check the installation for gas leaks. If gas

proving is successful, the gas valve will open and the 'Gas On' LED will illuminate.

ON = Gas On

OFF = Gas Off



Testing

Under normal working conditions this LED is off.

This feature is disabled.

1000Si IOM Rev: 06

01-20

Merlin 1000Si