AGS Merlin 1000Si 설치 및 운영 매뉴얼 - 페이지 9

{카테고리_이름} AGS Merlin 1000Si에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Merlin 1000Si 16 페이지. Gas safety products, gas utility controller
AGS Merlin 1000Si에 대해서도 마찬가지입니다: 사용자 및 설치 매뉴얼 (7 페이지), 사용자 및 설치 매뉴얼 (9 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄
AGS Merlin 1000Si 설치 및 운영 매뉴얼
Installation & Operation Manual

OPERATION

First Power Up

On connecting mains power, an LED on the front of the panel (AGS Logo) will illuminate red.
Turn the key switch to on position.
Turn the key switch to the off position to turn the panel off.

Emergency Shut Off Button

The emergency shut off button is located on the front of the panel.
There is also a facility for remote shut off buttons to be wired in series on the circuit board.
The emergency shut off button(s) will cut off the gas supply and electrics only when activated.
To reinstate the system, the emergency shut off button(s) will need to be reset and the panel
restarted.

LED Indicators

Gas On
When the key switch is turned on, the Merlin 1000Si will check the installation for gas leaks. If gas
proving is successful, the gas valve will open and the 'Gas On' LED will illuminate.
ON = Gas On
OFF = Gas Off
Testing
Under normal working conditions this LED is off.
This feature is disabled.
1000Si IOM Rev: 06
01-20
Merlin 1000Si
9