- ページ 4

ガス検知器 AGS Merlin TFTのPDF インストレーション＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。AGS Merlin TFT 16 ページ。

Installation & Operation Manual

Typical Installation Arrangement

Many detection systems are designed around a centralised control unit of which the location

also needs to be considered. They should be located outside of the hazardous area that they

are monitoring.

Easy accessibility is required both for status observation and alarm purposes.

The use of sound strobes are highly recommended.

Unpack all the parts!

1. Carefully remove the rear cover from the unit by releasing

the two latching clips located at the bottom of the case.

To do this – use a small flat head screwdriver.

2. Using the rear cover - mark the screw holes to the wall.

Ensure the wall surface is flat to prevent base distortion.

3. There are two pre-fractured areas for cable entry provided

on the inside of the rear cover which may be cut away as

required.

4. After executing the mounting and the connections – replace

the rear cover ensuring the two clips are latched.

5. Make a note of the installation date on the label located on the side of the unit.

Be careful when creating access for cables – Damage to boards will void any warranty.

AGSDETTFT-IOM Iss: 5 06-20

Merlin Gas Detector TFT