- ページ 12

ガス検知器 AGS Mini MerlinのPDF インストレーションオペレーション＆メンテナンスをオンラインで閲覧またはダウンロードできます。AGS Mini Merlin 20 ページ。 Ch4 co: dual gas detector methane & carbon monoxide
AGS Mini Merlin にも：ユーザーマニュアル (16 ページ), インストレーション＆オペレーションマニュアル (16 ページ)

ページを印刷する

Installation, Operation & Maintenance

OPERATION

First Power Up

When electrical power is supplied, press and hold the Touch button, the device enters a

stabilisation phase for approximately one minute – during this period the device is not

operational. If the mini-merlin has been configured to 'auto reset' – your device will power up

automatically when electrical power is supplied.

Reset the Device

To reset after an alarm - press the Touch button once.

If the device enters an alarm state, the gas level indicator will remain red to alert the user that a

high/dangerous level of gas has been detected, until the device is reset.

Manual Operation Test

This option gives the user the opportunity to test each output/contact in response to gas.

Press and hold the Touch button during normal operation.

Display Overview

The user can choose whether to have the audible buzzer sound when gas levels are detected!

For more information see section 'Auto Reset & Buzzer switches'.

Power Off

To turn your device off, remove / isolate electrical power supply.

When power is removed manually or due to an unpredicted power failure the CO and NG BMS circuit will

change state switching off boilers/appliances via a limit switch if configured to do so!

Rev: 20 12-20

Mini-Merlin