AGS Mini Merlin Експлуатація та технічне обслуговування установки - Сторінка 12
Переглянути онлайн або завантажити pdf Експлуатація та технічне обслуговування установки для Детектори газу AGS Mini Merlin. AGS Mini Merlin 20 сторінок. Ch4 co: dual gas detector methane & carbon monoxide
Також для AGS Mini Merlin: Посібник користувача (16 сторінок), Посібник з монтажу та експлуатації (16 сторінок)
Друкувати сторінку
Installation, Operation & Maintenance
OPERATION
First Power Up
When electrical power is supplied, press and hold the Touch button, the device enters a
stabilisation phase for approximately one minute – during this period the device is not
operational. If the mini-merlin has been configured to 'auto reset' – your device will power up
automatically when electrical power is supplied.
Reset the Device
To reset after an alarm - press the Touch button once.
If the device enters an alarm state, the gas level indicator will remain red to alert the user that a
high/dangerous level of gas has been detected, until the device is reset.
Manual Operation Test
This option gives the user the opportunity to test each output/contact in response to gas.
Press and hold the Touch button during normal operation.
Display Overview
The user can choose whether to have the audible buzzer sound when gas levels are detected!
For more information see section 'Auto Reset & Buzzer switches'.
Power Off
To turn your device off, remove / isolate electrical power supply.
When power is removed manually or due to an unpredicted power failure the CO and NG BMS circuit will
change state switching off boilers/appliances via a limit switch if configured to do so!
Rev: 20 12-20
Mini-Merlin
12