- ページ 5
コントロールパネル AGS Parksafe Control PanelのPDF インストレーション オペレーション＆メンテナンスをオンラインで閲覧またはダウンロードできます。AGS Parksafe Control Panel 16 ページ。 Ventilation control panel
AGS Parksafe Control Panel にも： インストレーション＆オペレーションマニュアル (16 ページ), インストレーション＆オペレーションマニュアル (16 ページ), インストレーション、オペレーション＆メンテナンスマニュアル (20 ページ)
ページを印刷する
Installation, Operation & Maintenance
Access & Mounting
Unpack all the parts!
Designed for surface mounting, it must be installed by a licensed,
insured contractor.
Carefully remove the front cover from the unit by unscrewing the
1.
four bolts located at each corner. To do this – use the socket
wrench provided.
Mark the four screw holes located on the back of the enclosure to
2.
the wall. Ensure the wall surface is flat to prevent base distortion.
After executing the mounting and the connections – replace the
3.
front cover and insert the security caps over the four bolts.
Main Board Overview
Be careful when creating access for cables – Damage to circuit boards will void any warranty!
Any damage attempting to remove the circuit board parts may void any warranty!
Detectors must be earthed/grounded for electrical safety and to limit the effects of EMC or R/F interference!
For MODBUS communications, a shielded cable is used!
Do not remove the Gas Sensor Module when the system is powered!
Rev: 13
0721
Parksafe Control Panel
5