- ページ 5

自動車アクセサリー Dynojet 2009-2010 Ducati HypermotardのPDF 取付説明書および取扱説明書をオンラインで閲覧またはダウンロードできます。Dynojet 2009-2010 Ducati Hypermotard 6 ページ。

FIG.G

FIG.H

FIG.I

14-003 w ww.powercommander.com

Wire tap

Grey wire

PCV

Locate the stock Throttle Position Sensor. This sensor

is located on the left side of the throttle bodies.

10 Cut a 1" slit in the sheathing for the TPS harness. This

allows access to the wires.

11 Using the supplied wire tap crimp the ORANGE wire

(Fig. G).

12 Connect the GREY wire from the PCV harness to the

wire tap (Fig. G).

13 Attach the ground wire from the PCV harness to the negative terminal of the

battery (Fig. H).

14 Install the PCV to the side of the battery using the supplied velcro (Fig. H)

Make sure to clean both surfaces with the alcohol swab before attaching.

15 Reinstall side panels and seat.

16 Remove the right hand side fairing

17 Locate the O2 sensor connector. It is a BLACK 4 pin connector located on the

right hand side of the bike.

18 Unplug this connector.

2009-2010 Ducati Hypermotard PCV - 5