- ページ 5

自動車アクセサリー Dynojet power commander IIIのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Dynojet power commander III 5 ページ。 2004 kawasaki zx12r
Dynojet power commander III にも: インストレーション・インストラクション (5 ページ), インストレーション・マニュアル (3 ページ), インストレーション・インストラクション (4 ページ), インストレーション・マニュアル (3 ページ), インストレーション・インストラクション (4 ページ), 取付説明書 (3 ページ), 取り付け方法 (3 ページ), インストレーション・インストラクション (3 ページ), 取り付け方法 (3 ページ)

Dynojet power commander III インストレーション・インストラクション
Trouble Shooting
If you feel that you are having any problems at all with the Power Commander III, disconnect it
from your motorcycle. This will allow the motorcycle to run directly off of the stock ECU.
The lights don't come on when I turn the ignition switch on.
Check to make sure connectors are seated and the kill switch is in the "run" position.
The on-board adjustment buttons do not hold their settings.
Be sure to wait 20-30 seconds after making adjustments before starting or turning off the bike.
Can not upload to or download from the Power Commander III.
Check to see that the serial cable is firmly in place. Verify that ignition switch is on and the kill
switch is in the "run" position.
My mouse uses the same serial port.
If your computer has a PS/2 port purchase a DB9 to PS/2 adapter for your mouse.
I get a "verify failed...." message when I upload a map to the Power Commander III.
Programs running in the background or fluctuations in supply voltage (from outlet) can some-
times cause this error. In most cases, the information was sent properly to the Power
Commander III. Pushing the "upload all" button again should produce a "tables sent and veri-
fied" message.
I typed in notes, but they didn't save.
You need to first push the "accept" button in the notes window and then the "save file" button.
www.powercommander.com
PCIII User's Guide - B