Dynojet power commander III Kurulum Talimatları - Sayfa 5

Otomobil Aksesuarları Dynojet power commander III için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Dynojet power commander III 5 sayfaları. 2004 kawasaki zx12r
Ayrıca Dynojet power commander III için: Kurulum Talimatları (5 sayfalar), Kurulum Kılavuzu (3 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Kılavuzu (3 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları Kılavuzu (3 sayfalar), Kurulum Talimatları (3 sayfalar), Kurulum Talimatları (3 sayfalar), Kurulum Talimatları (3 sayfalar)

Trouble Shooting

If you feel that you are having any problems at all with the Power Commander III, disconnect it

from your motorcycle. This will allow the motorcycle to run directly off of the stock ECU.

The lights don't come on when I turn the ignition switch on.

Check to make sure connectors are seated and the kill switch is in the "run" position.

The on-board adjustment buttons do not hold their settings.

Be sure to wait 20-30 seconds after making adjustments before starting or turning off the bike.

Can not upload to or download from the Power Commander III.

Check to see that the serial cable is firmly in place. Verify that ignition switch is on and the kill

switch is in the "run" position.

My mouse uses the same serial port.

If your computer has a PS/2 port purchase a DB9 to PS/2 adapter for your mouse.

I get a "verify failed...." message when I upload a map to the Power Commander III.

Programs running in the background or fluctuations in supply voltage (from outlet) can some-

times cause this error. In most cases, the information was sent properly to the Power

Commander III. Pushing the "upload all" button again should produce a "tables sent and veri-

fied" message.

I typed in notes, but they didn't save.

You need to first push the "accept" button in the notes window and then the "save file" button.

www.powercommander.com

PCIII User's Guide - B