- ページ 11

扇風機 AireGard FS-150のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AireGard FS-150 12 ページ。 Fresh air supply

FILTER MAINTENANCE

3. Open the Inspection Door.

a) Unbuckle the clipper

Beware of the falling Inspection Door when loosening and opening it to avoid personal injuries.

b) Pull open the Inspection Door downward

pull open the Inspection Door downward

4. Remove the Air Filter

a) Use your hands to gently remove the Air Filter

(the Metal Filter, High Efficiency Combo Filter

and Activated Carbon FIlter in the orderly

sequence)by pulling the attached strap while

preventing it from falling off directly from its

compartments.

b) Beware of falling dirts, dusts or insects from the

surface of the High Efficiency Combo Filter.

5. Use Vacumm Cleaner to Clean the Dust & Dirt

a) Do not wash the filter with water or other

substance as it may damage the filter and

affect its functionability.

b) Insert the High Efficiency Combo Filter back into

the compartment after cleaning. Take note of

the correct direction of the filter before insertion.

6. Switch on the Remote Control for Test Run

When the "Filter Change Indicator" is lit, please

change the High Efficiency Combo Filter.

a) The sequence order of changing the filter is

the same as Step 1-3

b) Remove the used filter and insert the new

High Efficiency Combo Filter into the given filter

compartments.

c) Switch on the remote control for test run

PRECAUTIONS

Inspection Door

Activated Carbon Filter

High Efficiency Combo Filter

unbuckle

the clipper

pull downward

Metal Filter

page 9