- ページ 4

ラボラトリー機器 AGS Merlin 1000SのPDF ユーザー・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。AGS Merlin 1000S 10 ページ。 Gas utility isolation controller
AGS Merlin 1000S にも：インストレーション、オペレーション、メンテナンスマニュアル (10 ページ), インストレーション＆オペレーションマニュアル (12 ページ), インストレーション＆オペレーションマニュアル (16 ページ)

Merlin 1000S

Gas Utility Controller

(4)

[PRESSURE SENSOR]

Gas Pressure Transducer

The terminals marked pressure sensor "+ - IN ".These wire to the gas pressure transducer

which is screwed into the downstream port on the gas solenoid valve (see wiring below).

ENSURE THE TRANSDUCER IS CONNECTED TO THE DOWNSTREAM PORT.

Operating Pressure = 0.17psi min - 1.45psi max

(5)

[EM REMOTE]

These connections are linked out as a factory setting. (fig1)

Remote emergency shut-off buttons should be volt free and

wired to the Merlin panel using a Plenum Security Cable. White,

18/2 (18AWG 2 Conductor), stranded, CMP or similar.

(6)

[GAS DETECTOR]

These terminals are [+ -] and [

These can be wired to various Merlin gas detectors.

For multiple detector wiring consult the gas detector manual (see example wiring below).

If no detector is being used leave the link in [

Rev: 04 Date: 15-08-18

] and should be volt free dry contact connections.

] (fig2)

User & Installation Manual

fig1

fig2