- ページ 13

おもちゃ Deagostini MODEL SPACE Honda CB750 FOURのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。Deagostini MODEL SPACE Honda CB750 FOUR 16 ページ。 Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR にも：組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (20 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ)

Tighten a type U screw into the hole at the rear of the

caliper, to secure it to the fork.

Push the projections of the stay into place in the holes

in the fender. Then test-fit the other stay to the front of

the fender in the same way.

Honda CB750 FOUR: Assembly Guide

Place one of the front fender stays over the rear of

the fender, aligning the two projections with the two

holes (arrowed).

Check that you can align the screw holes in the

stays with those of the forks.

From the left side, the screw holes of the ends of the

fender stays should align with the screw holes L3 and L4

of the fork. Check that they align on the right side as well.