Deagostini MODEL SPACE Honda CB750 FOUR Montagehandleiding - Pagina 13

Blader online of download pdf Montagehandleiding voor {categorie_naam} Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16 pagina's. Pack 12
Ook voor Deagostini MODEL SPACE Honda CB750 FOUR: Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (20 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's), Montagehandleiding (16 pagina's)

Tighten a type U screw into the hole at the rear of the

caliper, to secure it to the fork.

Push the projections of the stay into place in the holes

in the fender. Then test-fit the other stay to the front of

the fender in the same way.

Honda CB750 FOUR: Assembly Guide

Place one of the front fender stays over the rear of

the fender, aligning the two projections with the two

holes (arrowed).

Check that you can align the screw holes in the

stays with those of the forks.

From the left side, the screw holes of the ends of the

fender stays should align with the screw holes L3 and L4

of the fork. Check that they align on the right side as well.