- ページ 8
ゲーム GAME ELF 412 in 1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。GAME ELF 412 in 1 18 ページ。 Arcade game board
3.6 SERVICE (sub Menu)
1.
On the System Setting Menu, select item "6. Service" and press 1P-START to
enter the Service Menu.
2.
Moving 1P joystick up or down to choose item, then 1P-C to modify item.
3.
SW1 switch on game board adjust Display Mode. See Remark para 3.6.1..
4.
After finishing modification, press 1P-START to save setting(as figure 5), then
press 1P-A to return System Menu.
5.
Select "1. Exit" to exit, the new configuration is valid after system automatically
restarts.
3.6.1 Display Mode (Setting Switch SW1)
1.
Display mode
This game board support both VGA and CGA display modes, see below for
settings.
VGA mode (31.5Khz): Before switching on the machine power, set BIT1 of SW1
ON. Connect the VGA monitor to the VGA output connector. The output resolution
is 800x600.
CGA mode (15.75KHz): Before switching on the machine power, set BIT1 of SW1
OFF to use a regular JAMMA cabinet. The VGA port output is invalid.
Remark: Do not operate SW1 with power applied. This may cause the special
electronic smoke to leak out affecting normal operation!
Figure 4 :: Service Menu
NOTE:: The Dark Blue text is very difficult to read
Figure 5:: Saving Text