GAME ELF 412 in 1 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} GAME ELF 412 in 1. GAME ELF 412 in 1 18 pagina's. Arcade game board

3.6 SERVICE (sub Menu)

On the System Setting Menu, select item "6. Service" and press 1P-START to

enter the Service Menu.

Moving 1P joystick up or down to choose item, then 1P-C to modify item.

SW1 switch on game board adjust Display Mode. See Remark para 3.6.1..

After finishing modification, press 1P-START to save setting(as figure 5), then

press 1P-A to return System Menu.

Select "1. Exit" to exit, the new configuration is valid after system automatically

restarts.

3.6.1 Display Mode (Setting Switch SW1)

Display mode

This game board support both VGA and CGA display modes, see below for

settings.

VGA mode (31.5Khz): Before switching on the machine power, set BIT1 of SW1

ON. Connect the VGA monitor to the VGA output connector. The output resolution

is 800x600.

CGA mode (15.75KHz): Before switching on the machine power, set BIT1 of SW1

OFF to use a regular JAMMA cabinet. The VGA port output is invalid.

Remark: Do not operate SW1 with power applied. This may cause the special

electronic smoke to leak out affecting normal operation!

Figure 4 :: Service Menu

NOTE:: The Dark Blue text is very difficult to read

Figure 5:: Saving Text