- ページ 5

防犯カメラ HIKVISION D7T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION D7T Series 12 ページ。 Bullet & turret camera
HIKVISION D7T Series にも：ユーザーマニュアル (11 ページ)

ページを印刷する

4. Connect the corresponding cables.

5. Adjust the camera according to Figure 2-3 to get an

optimum angle.

1). Loosen the P screw to adjust the pan direction

[0°~360°]. Tighten the screw after completing

the adjustment.

2). Loosen the T screw to adjust the tilt direction

[0°~180°]. Tighten the screw after completing

the adjustment.

3). Loosen the R screw and rotate the camera

[0°~360°] to adjust the lens to the surveillance

angle. Tighten the screw after completing the

adjustment.

Rotation Position Range

[0°-360°]

6. Tighten the fixing screws and the trim ring to fix the

camera.

2.1.2 Ceiling/Wall Mounting with Gang Box

You need to purchase a gang box separately if you adopt celling

mounting.

Steps:

1. Take apart the gang box and align the screw holes of

the bullet camera and the gang box cover.

2. Route the cables through the cable hole of gang box

and fix the camera with the gang box cover with the

supplied screws, as shown in Figure 2-4.

Figure 2-4 Fix the Camera with the Gang Box

3. Drill the screw holes in the ceiling/wall according to

the supplied drill template.

4. Hammer the supplied screws into the screw holes to

fix the gang box to the ceiling/wall.

Figure 2-3 3-axis Adjustment

Gang Box Cover

Screw

Pan Position Range

[0°-360°]

P Screw

Tilt Position Range

[0°-180°]

T Screw

R Screw