- ページ 5
レーザーレベル Centre Point 400098のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Centre Point 400098 13 ページ。 Rotary laser level
ページを印刷するUsing the Laser (continued)
POWER SUPPLY
The instrument is supplied with four AA 1.5V
•
alkaline batteries as its main power source.
Battery replacement
Unscrew and remove the battery cover door
•
and the batteries
Insert the alkaline batteries into the battery
•
tray according to polarity.
Replace the battery cover door and tighten
•
the screw.
SETUP
Select a place as close as practical
•
to the work site. Ensure the location
is clear of traffic.
Place the laser on a level surface
•
such as a bench or supplied mount.
OPERATION
Powering on
Press the power button once and
•
the instrument will power on and begin
automatically self-levelling. When this
levelling process is complete, the penta
prism inside the lighthouse will start rotating.
If the instrument is outside the self levelling
•
range the instrument will not level causing the
laser beam to flash continuously. If this occurs,
reposition the instrument onto a level surface
until the instrument can level off.
Powering off
Press the power button once and the
•
instrument will power off.
Tilt alarm
Once the instrument has been levelled off the
•
tilt alarm can be enabled by pressing the tilt
alarm button. The tilt alarm indicator light will
flash continuously whilst active.
If the instrument is disturbed while the alarm
•
is active the instrument will stop rotating and
will need to be powered off and on again to
reset its level position.
5