Centre Point 400098 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лазерный уровень Centre Point 400098. Centre Point 400098 13 страниц. Rotary laser level
Печатать страницуUsing the Laser (continued)
POWER SUPPLY
The instrument is supplied with four AA 1.5V
•
alkaline batteries as its main power source.
Battery replacement
Unscrew and remove the battery cover door
•
and the batteries
Insert the alkaline batteries into the battery
•
tray according to polarity.
Replace the battery cover door and tighten
•
the screw.
SETUP
Select a place as close as practical
•
to the work site. Ensure the location
is clear of traffic.
Place the laser on a level surface
•
such as a bench or supplied mount.
OPERATION
Powering on
Press the power button once and
•
the instrument will power on and begin
automatically self-levelling. When this
levelling process is complete, the penta
prism inside the lighthouse will start rotating.
If the instrument is outside the self levelling
•
range the instrument will not level causing the
laser beam to flash continuously. If this occurs,
reposition the instrument onto a level surface
until the instrument can level off.
Powering off
Press the power button once and the
•
instrument will power off.
Tilt alarm
Once the instrument has been levelled off the
•
tilt alarm can be enabled by pressing the tilt
alarm button. The tilt alarm indicator light will
flash continuously whilst active.
If the instrument is disturbed while the alarm
•
is active the instrument will stop rotating and
will need to be powered off and on again to
reset its level position.
5