- ページ 10

計測機器 Decagon Devices DS-2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Decagon Devices DS-2 20 ページ。 Sonic anemometer

DS-2

value will be the average of 30, 10 second averages. If customers

desire temporal resolutions ﬁner than one minute or wish to obtain

samples without averages at frequencies of one to nine seconds, then

they must use a Campbell Scientiﬁc or similar logger.

3.1

3.5 mm Stereo Plug Wiring

DS-2 anemometers, used with Decagon loggers, come with a 3.5 mm

stereo plug connector. The stereo plug allows for rapid connection

directly to Decagon's Em50 and Em50G data loggers. Figure 3 shows

the wiring conﬁguration for this connector.

3.2

DC-2 Anemometers may be purchased for use with non-Decagon data

loggers. These sensors typically come conﬁgured with stripped and

tinned (pigtail) lead wires for use with SDI BUS terminals. Refer

to your particular logger manual for details on wiring. Our inte-

grator's guide gives detailed instructions on connecting the DS-2 to

non-Decagon loggers. Please visit

for the complete integrator's guide.

3 CONNECTING THE ANEMOMETER

Figure 1: 3.5 mm Stereo Plug

http://www.decagon.com/support