- ページ 7

配管製品 Bristan Pisa seriesのPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bristan Pisa series 12 ページ。

5. Installation Small Basin Mixer & Basin Mixer

Identify all components are present prior to installation.

Install mixer to the basin. Secure the mixer to the surface of the basin using the fixing kit

(12,13,14 & 15) with the plinth above the basin.

Screw in connecting tail pipes (11) by hand ONLY (DO NOT OVERTIGHTEN)

Fit clicker waste and rubber washer into the basin. Use pure silicon sealant where

necessary. Place shaped rubber washer under the basin and secure waste by tightening the

backnut. In order to fill the basin, the button in the middle of the waste needs to be pressed

down. To release water, press button again.

Connect the hot and cold water supplies and turn both supplies on. Lift and turn handle

both ways for a few minutes, letting the water flow, to check all joints and connections for

leaks.

1. Handle

2. Grub Screw

3. Cap

4. Shroud

5. Locking Nut

6. Cartridge

7. Body

8. Flow Straightener

9. Plinth

10. 'O' ring

11. Tail pipes

12. Rubber 'C' shaped washer (x1)

13. Metal 'C' shaped washer (x1)

14. Threaded Studs

15. Fixing Nuts

16. Clicker Waste

(x1)

(x2)

(x1)