- ページ 9

浄水器 Adey MagnaCleanseのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Adey MagnaCleanse 12 ページ。
Adey MagnaCleanse にも：ユーザーマニュアル (8 ページ)

Step-by-step

Once complete, turn OFF the HTV

isolation valve 2 and the cold mains

supply. All the radiators should be

full and valves open. Remove the

header tank and thoroughly clean,

then reconnect. Remove the cap from

the expansion pipe and reconnect

the cold mains supply to the header

tank supply and the cold feed system

supply.

Top up the system allowing the

header tank to fill to the required

level. Once complete, remove drained

MagnaCleanse assembly, disconnect

and reinstall MagnaClean filter to the

isolation valves. If this method is not

appropriate ensure a full drain down is

carried out.

Add a suitable inhibitor, such as

MC1+

, into the canister i.e. use the

pro-fill bleed valve or remove canister

lid assembly and pour into the filter.

Open up the isolation valves and

remove any air by venting using the

filter's air vent.

Turn on the system and

re-set controls to the customer

requirements. Open any bypass valves

previously closed.