- ページ 7
ストリング・マシン Gamma Progression ElsのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma Progression Els 19 ページ。
Gamma Progression Els にも： オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)
ページを印刷する
POWER CONNECTION & CONTROLS
string up tighter on the X-Els machine compared to synthetic or natural gut strings.
Therefore, when stringing with Aramid (Kevlar, Technora) hybrid strings or metallic strings,
we recommend setting tension 4-5 lbs. lower than you would normally use for synthetic or
natural gut strings.
Caution: To avoid racquet damage, the center posts should not contact the racquet prior to
locking down the support posts.
MOUNTING THE FRAME
Setting the String Tension
String tensions may be entered and stored into
one of nine memory storage settings (See
section on Control panel Functions and fea-
tures) by using the tension index buttons. While
tension setting is entered, the value displayed
will be temporary until the "Enter" button is
pressed to store it in one of the nine permanent
memory settings.
Aramid fiber and metallic strings will generally
Adjusting the Frame Support Posts
Loosen the lock bolts of the frame support
posts and space them apart with the frame
support slides separated by the approxi-
mate length of the racquet head. Although it
is not required, it is good practice to center
the support posts on the turntable. Lock one
of the posts in position by tightening the lock
bolt and position the other post until the
frame support slide is positioned near the
inside surface of the racquet frame. Se-
curely tighten the lock bolt of the second
support post.
Tightening the Frame Supports
Tighten the Frame Support Slides by turning
the adjustment knob clockwise until snug
against the racquet frame and slight resis-
tance is felt.
Caution: Overtightening the Center Sup-
ports will stretch the head of the racquet and
could cause racquet damage.
6